Imagine not having to worry about guests and children spilling their food or drinks all over your beautiful lounge or your limited edition designer rug. Protect all the furniture you love with a simple water-based coating of Nano4-Furniture fabric protection spray.

EASY TO APPLY

STEP 1. We recommend doing a test on a small area first; allow it to cure for 24 hours to determine the desired results.

STEP 2. Before you apply, make sure the surface is clean, dry and free of residues. Do not dilute Nano4-Furniture with water, as it is not required. Spray generously (15 cm away) on the surface and make sure it's wet.

STEP 3. Nano4-Furniture takes about 24 – 48 hours to be fully cured. The time required for curing may vary depending on ambient temperatures. Nano4-Furniture offers a long life protection of up to 30 washes for new surface and when applied correctly according to instructions and maintained according to Nano4Life's maintenance guide. However, you may need to re-apply earlier depending on the usage and to achieve the optimum results.

TIPS

• For Sofas/Car Seats/Clothes/Any Textiles which can absorb water etc. Apply 1 wet coat using the original bottle or a manual pump action garden spray. If the material doesn’t seem to absorb easily, spray and then use a cloth to rub the liquid into the material. Continue until complete.
• For Shoes: Apply 2 coats wet to wet for best results. Apply the 2nd coat before the 1st coat dries while it’s still wet (usually within 3 – 5 minutes). If the material doesn’t seem to absorb easily, spray and use a cloth to rub the liquid into the material. Continue until complete.
• Check to see if there are any areas you may have missed and reapply as required, as the coated surface should have a wet look to achieve the optimum results.