Instructions : Nano4-Furniture Car Seats

How to apply:

We recommend doing a test on a small area first; allow it to cure for 24 hours to determine the desired results.
Before you apply, make sure the surface is clean, dry and free of residues.
Do not dilute Nano4-Furniture with water as it is not required.
Spray generously (15cm away) on the surface and make sure it's wet. A second coat may be required depending on the thickness and absorption of the textile. Most textiles may be able to get away with one coat.
Nano4-Furniture takes about 24 hours to be fully cured. The time required for curing may vary depending on ambient temperatures.
Protection may last up to 30 washes. However, you can re-apply Nano4-Furniture to the fabric as necessary to get the optimum results. To determine whether you need to re-coat or not, just wet the surface with water. If water is absorbed, then re-apply with Nano4-Furniture.

Available in sizes:

200ml and 500ml. For bottles larger than 500ml please contact us directly.

Coverage

One litre can cover the surface area of approximately between 10m² - 40m². We recommend making a test first on a small area to determine absorption and desired results.

Precautions - DO NOT SWALLOW

Apply when surface temperature is between 5-30°C
Avoid moisture contact with the surface after application until fully cured for 24 hours for optimum results
Wear gloves and protective clothing
Avoid spraying in windy conditions
Wash hands after application
Keep ignition sources away - Do not smoke
Keep out of reach of children
PH Value 14 or above cleaner can destroy the effect
Nano4-Furniture does not protect against acid, etching, wear and high water pressure 50 bar and above