Are you someone who just doesn’t like spending too much time washing your car? Or just simply feed up with getting your car paint damage from tree sap, acid rain, road tar, insects, and bird & bat droppings?

EASY TO APPLY

STEP 1. Before you apply, make sure the surface is clean, dry and free from residue.

STEP 2. Apply the Nano4-Preclean product by spraying 15cm away (on a small area 30cm x 30cm at a time), rub over the surface with a micro fibre cloth in a circular motion until dry. While rubbing, look on an angle to check if any streak marks are left, if so, rub over again until clear and dry. Continue until complete. Nano4-Preclean is used to remove any microscopic dirt and any previous chemical residues to ensure the glossy surface is clean. 

STEP 3. Now apply Nano4-Car Protect paint protection DIY kit with a brand new micro fibre cloth. Follow the same application process as applying the Nano4-Preclean.

STEP 4. Let it dry for 12 – 24 hours before allowing contacting with water.

Nano4-Car Protect offers a long life protection of up to 5 years for new surface and when applied correctly according to instructions and maintained according to Nano4Life’s maintenance guide. However, you may need to re-apply earlier depending on the harshness of the environment, the usage and for optimum results.

TIPS

• If the surface is dirty, clean it first with traditional methods before applying the Nano4-Preclean.
• Avoid applying the products on a very hot or windy day if possible (preferably in the shade and in a well ventilated area).
• Apply on a small section at a time so the liquid doesn’t dry up before you rub over the surface.
• If you think you’ve missed a spot, go back and re-apply to ensure all areas are coated
• Before you apply Nano4-Car Protect, spray 3 pumps on the new micro fibre cloth. Follow the instructions and apply accordingly