Nano4-Car Protect Paint Protection DIY Kit

Are you someone who just doesn’t like spending too much time washing your car? Or just simply feed up with getting your car paint damage from tree sap, acid rain, road tar, insects, and bird & bat droppings?

These unavoidable situations can happen to anyone and it can be frustrating, annoying to clean or worst, costly to repair. Nano4-Car Protect paint protection DIY kit can be applied on your car, forming a very thin coating which seals and protects your car when you’re not around.

Where can I apply it?

Cars
Taxis
Buses
Trucks
Utes
Limousines
Motorcycles

Why choose Nano4-Car Protect paint protection DIY kit over other products?

Greener – Our product is made of quartz sand also known as liquid glass. The natural ingredients are formulated with the environment in mind, so when you choose Nano4-Car Protect paint protection DIY kit over other products, you are contributing to environmental sustainability.

Simpler – Since it is available in DIY kits, you don’t need to be an expert to apply the products. It comes with simple to follow instructions and it is quick & easy to apply.

Smarter – Nano4-Car Protect paint protection DIY kit not only protect against tree sap, acid rain, road tar, insects, and bird & bat droppings. It also offers full protect from dirt and grime, UV rays, frost resistant, water repellent, sea salt deposit, abrasion resistant and resistant to pressure wash (50 bar & below). Giving your car a smarter protection.

Other features and benefits

Non-toxic
Easy to clean
Paint protection
Ethanol base
Curing time 12 – 24 hours
Protection up to 5 years

PRODUCT SIZE	COVERAGE	EXAMPLE ITEMS TO SEAL AND PROTECT
100ml Bottle Kit	20m²	1 average size car
200ml Bottle Kit	40m²	1 medium to large size car or 2 average size cars
500ml Bottle Kit	100m²	2 medium to large size cars and 1 average size car

EASY TO APPLY

STEP 1. Before you apply, make sure the surface is clean, dry and free from residue.

STEP 2. Apply the Nano4-Preclean product by spraying 15cm away (on a small area 30cm x 30cm at a time), rub over the surface with a micro fibre cloth in a circular motion until dry. While rubbing, look on an angle to check if any streak marks are left, if so, rub over again until clear and dry. Continue until complete. Nano4-Preclean is used to remove any microscopic dirt and any previous chemical residues to ensure the glossy surface is clean.

STEP 3. Now apply Nano4-Car Protect paint protection DIY kit with a brand new micro fibre cloth. Follow the same application process as applying the Nano4-Preclean.

STEP 4. Let it dry for 12 – 24 hours before allowing contacting with water.

Nano4-Car Protect offers a long life protection of up to 5 years for new surface and when applied correctly according to instructions and maintained according to Nano4Life’s maintenance guide. However, you may need to re-apply earlier depending on the harshness of the environment, the usage and for optimum results.

TIPS

If the surface is dirty, clean it first with traditional methods before applying the Nano4-Preclean.
Avoid applying the products on a very hot or windy day if possible (preferably in the shade and in a well ventilated area).
Apply on a small section at a time so the liquid doesn’t dry up before you rub over the surface.
If you think you’ve missed a spot, go back and re-apply to ensure all areas are coated
Before you apply Nano4-Car Protect, spray 3 pumps on the new micro fibre cloth. Follow the instructions and apply accordingly

PRECAUTIONS – DO NOT SWALLOW

Always apply in a well ventilated area
Apply when surface temperature is between 5 – 30℃
Do not let products dry up before polishing
Avoid moisture contact with the surface after application until fully cured for 24 hours for optimum results
Wear gloves and protective clothing
Store in a cool and dry location away from direct sunlight
Avoid applying in windy conditions
Wash hands after application
Highly flammable
Keep ignition sources away – Do not smoke
Keep out of reach of children
PH Value 14 or above cleaner can destroy the effect
Nano4-Car Protect does not protect against etching, wear and high water pressure 50 bar and above

CHEMICAL COMPOSITION

Ethanol	(C₂H₆O)	98% w/w
Silicon Dioxide	(SiO₂)	0.4% w/w
Reaction Mass of Dimethyl Adipate	(C₈H₁₄O₄)	0.2% w/w
Dimethyl Glutarate	(C₇H₁₂O₄)	0.4% w/w
Methyl Ethyl Ketone	(C₂H₈O)	1% w/w

Cars & Bikes Paint Protection (DIY)

Nano4-Car Protect

Follow